Call Us
WhatsApp Us
Email Us
Menu
blank
Facebook Linkedin Instagram
blank

Follow Us

Facebook Linkedin Instagram
RE-2554

RE-2554

    The microprocessor based UL listed 4 Zone conventional fire alarm control panel, the system has 16 X 2 LCDcharacter,4 zones detection circuit,, 3 common potential free contacts &2 common NAC sounder output, inbuilt Rs-485 for repeater connectivity,wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.
    RE-2554 fire alarm control panel is designed with unique protocol to be used for small & medium establishments, Schools, hospitals, hotels, banks, commercial building, and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

 

OR

Call Us
Category: Tag: Brand:

Commitment to Quality

Built with excellence, delivered with trust.

Customer Satisfaction

Your happiness is our highest success.

Standard Designed

Crafted to meet industry standards with perfection.

  • Switched Mode Power Supply.
  • Modular Construction
  • Auto Resettable Fuse
  • Surge Protection for all Input and outputs.
  • Programmable AC loss delay/Trouble Remainder/Alarm Verification
  • Battery polarity reversible protection
  • Surface Mount Technology
  • Over All current consumption is low.
  • Fully complies with UL -864 and NFPA-72.
  • Rugged CRCA sheet with powder coated finish.
  • Operates on 110 – 220v 50 /60 Hz, AC Mains power supply.
  • 16×2 Dot Matrix LCD Display.
  • 4/8 Class B Style ‘B ‘ or Style ’C’ initiating device circuit (IDC).
    • All zones accept smoke detectors and any normally open contact device.
    • Any Zone can be configured as Alarm or supervisory Zone.
  • 2ClassBNotificationApplianceCircuits(NAC).
  • NAC shall be programmed as silenceable or Non Silenceable.
  • Supervisory Zone shall be Latching or Resettable.
  • Standby (battery) backup 24v DC power supply with built in charger
  • Error free Fire / Fault status in unambiguous colored LED indication.
  • System ON indication.
  • Main, Standby status audible and visual indication.
  • Battery Low visual warning with audible tone.
  • FormC relays for fire, fault and supervisory.
  • Resettable / Steady 24V D.C. Output.
  • RS 485 Communication facility (Optional).
  • Lamp Test facility.
  • All field wiring circuits are Power limited except 110 – 220v AC and Battery.
  • All field wiring circuits are supervised.
  • Walk Test facility.
  • Zone Isolation facility with loop voltage cut off.
  • Earth fault annunciation facility at 0 ohms.
  • AC Low voltage cutoff.
  • Programmable AC loss delay.
  • Programmable Alarm verification.
  • Programmable Trouble reminder.

  • Electrical Specification

    Primary Power
    120 – 220VAC ± 10%, 50 Hz, 2.5Amps.Standby Power
    24V D.C (2 Nos of 12v, 12Ah Sealed Lead acid battery).
    Quiescent current: 120mA    		 Initiating Device Circuits
    All zones are Class B Style B/C operation (Programmable).
    Normal Operating Voltage: 14 – 21 VDC.
    Alarm Current: 15 – 30mA.
    Short Circuit Current: 45mA Maximum.
    Loop resistance: 100 ohms Maximum.
    End-Of-Line Resistor: 3K9, 1/2watt
    Standby Current: 7mA (2mA for Detectors)
    Operating Condition
    Operating Temperature 0 – 49° C/32-120° F.
    Relative Humidity 93 ± 2% RH (non- condensing) at 32 ±2° C/90 ±3° F.
    Charging Circuit
    Charging Voltage 28.2V, ±0.5V
    Charging Current 800mA (Max.).    		 Notification Appliance Circuits
    Class B Style – Y wiring
    Operating Nominal Voltage: 24VDC
    Special Application Current for all NACs: 1.2Amps (0.6A per circuit)
    Line Drop: 1.8V
    End-Of-Line Resistor: 3K9, 1/2watt
    D.C. Output
    Supervised 24VDC regulated, 300mA Max.
    Common Relays
    Type : Form C
    No of Relays : 3
    Relay Contact Rating : 2Amps @ 30 VDC,
    0.5Amps @ 125VAC.
    Power Factor : 1.0

     

    Mechanical Specification

    Dimensions : (440W X 340H X 120D)
    Color : Red / White
    Construction : 18 Gauge (1.22mm) CRCA sheet with powder-coated Finish
    IP Rating : IP50
    Cable Entry : 11xø19mm Knockout in top of the cabinet
    10xø22.25mm Knockout in top of the cabinet

     

    Ordering Information

    Model Description
    RE- 2554-W 4 Zones
    RE- 2554-R 4 Zones

     

    Note:
    W-White Color,
    R- Red Color

     

    Compatible Devices

    Models Description
    RE-316S-2L Photoelectric Smoke detector with base.
    RE-316H-2L Heat detector with base.
    RE-316SH-2L Photoelectric & Heat detector with base
    RE-314 Common base for above
    RE-716MR MCP Red
    RE-716MG MCP Green
    RE-716MY MCP Yellow
    RE-24CS Mini Horn
    RE-24SS Sounder cum Strobe
    RE-Monitor 24VDC Output for Monitor Module
    RE-3K9 End Of Line Resistor

Additional information

Brand

Ravel

Related products

SHORT INTRODUCTION

We, at Multi Tech Solutions, started business in 1999 at Mehsana. We are deals in Multi Function Products, Printers, Fax, Copier, Solar Light, C.C.T.V, Security Products, Projectors, Currency Counting Machine.

PRODUCT CATEGORY
IMPORTANT LINKS
CONTACT US
HELPLINE NO.
EMAIL US

2025 © multitechsolutions.co.in | Designed by: jmdes.in

Tell us your requirements and we’ll help you choose the best product for your business.

Enquiry Form

"*" indicates required fields